Module Kia/Hyundai Kefico CPxxx3 Petrol CAN

FIDs: 448, 450, 452, 470, 471

Module for reading and writing of Kefico CPEGD3.20.1, CPEGP3.20.1, CPEGP3.20.2, CPGPSH3.24.1, CPGDSH3.26.2 and CPGPSH3.26.1 ECUs used in petrol Kia and Hyundai vehicles.

Kia/Hyundai Kefico CPEGD3.20.1/CPEGP3.20.1 (FID: 448)

ECU CPEGD3.20.1 is based on MCU Infineon Aurix TC277TP. CPEGP3.20.2 is based on MCU Infineon Aurix TC275TP. Both types are with internal flash memory 4Mb.

Allows reading and writing of calibration area through CAN-bus with checksum correction.

Kia/Hyundai Kefico CPEGP3.20.2/CPGPSH3.24.1 (FID: 450)

This ECU type is based on MCU Infineon Aurix TC275TP with internal flash memory 4Mb.

Allows reading and writing of calibration area through CAN-bus with checksum correction.

Kia/Hyundai Kefico CPGPSH3.26.1/CPGDSH3.26.2 (FID: 452)

This ECU type is based on MCU Infineon Aurix TC275TP with internal flash memory 4Mb.

Allows reading and writing of calibration area through CAN-bus with checksum correction.

Kia/Hyundai Kefico CPSCU1.xx.x (FID: 470)

FID supports CPSCU1.11.3, CPSCU1.11.2 and CPSCU1.00.1 SBW control unit based on MCU Infineon Aurix TC233 with internal flash memory 2Mb.

Allows FullFlash reading and writing of calibration area through OBD2 only CAN-bus with checksum correction. Kefico CPSCU1.00.1 is also possible to work with BENCH connection.

Kia/Hyundai Kefico CPIMT1.01.1 (FID: 471)

FID supports CPIMT1.01.1 TCUs based on MCU Infineon Aurix TC233 with internal flash memory 2Mb.

Allows FullFlash reading and writing of calibration area through OBD2 or bench by CAN-bus with checksum correction.


License cost:
300.00 Eur.   Order


Module requires security USB dongle

go to BitEdit
RUS ENG